Orders / Commandes (450) 449-4442
The stock availability is a live feed system. If item is not in stock, we will order it as fast as possible for you.
Some items are Special Order Only. We don't carry them in stock. Call us to place an order.
Check StockThese 1 3/4" Pivoting Risers will only work on the following Motorcycles:
BMW F800GS
KTM 690 E + R
KTM 990 Adventure
KTM 1190 Adventure
Low Pro 1-3/4" center to center rise for BMW F800GS and KTM's. This riser was developed around the F800GS ABS model. Riser barely clears the stock F800GS handlebar clamps and can be pivoted to your desired fore and aft location. Note; we moved our front brake perch inboard on the handlebar 3/8" as well to releave even more brake line and to insure proper function. When installing these risers pivoted up and back on the F800GS we spin the OEM caps 180 degrees to make the final tightening bolt the forward bolt. Low Pro Riser clears KTM clamps as well, a recommended Riser for the 990 Adventure with stock lines. Low Pro Riser also has (1) 8mm tap hole in the end of the posts to mount what ever you desire, Ram ball, etc. Anodized Clear. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers. THESE RISERS DO NOT WORK ON THE F650GS TWINS. those bikes have 7/8 inch diameter bars. Patented by the US Patent and Trademark Office under US Patent #6,920,806.
