Orders / Commandes (450) 449-4442
The stock availability is a live feed system. If item is not in stock, we will order it as fast as possible for you.
Some items are Special Order Only. We don't carry them in stock. Call us to place an order.
Check StockNote: Your OEM bar must have at least 1 1/2" of space BELOW the bar where it currently clamps in order to accommodate the bolt that runs through the body of these Anti-Vibe risers. If your machine doesn’t have 1 1/2" of space below where the bar currently clamps then these risers will not mount correctly.
These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. These risers use 8mm bolts. Always check and confirm that your vehicle has adequate cable and brake line length before installing any handlebar risers. Patented by the US Patent and Trademark Office under US Patent #6,920,806.
2" Elite Anti-Vibration Risers for 7/8" and/or 1-1/8" Fat bars ATV 2" Rise x 7/8 " Stem Clamp x 7/8" or 1 1/8" Handlebar. These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar".
If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations. Standard Pivoting Risers will not interfere. These risers use 8mm bolts. Always check and confirm that your vehicle has adeguate cable and brakeline length before installing any handlebar risers.
